Craftsman Table Saw #2

Craftsman 10″ Table Saw, model 113.27521
This is my second table saw also manufactured by Emerson Electric Co and sold with the Craftsman label. The top has been razor-bladed and has a fair but flat surface. It came with the original 1hp motor and the remote starter switch.

I plan on using this as a disc sander or as a dedicated dado machine.

rIMG_5484.jpg rIMG_5489.jpg

UPDATE
I’ve sold this machine

22 Replies to “Craftsman Table Saw #2”

Leave a reply
  1. Joe says:

    I have an Craftsman 8″ table saw model # 101.02142 in very good condition, all original including motor. Am interested in selling but can anyone give me an estimate of value.

  2. Luke says:

    Joe,

    It’s not worth all that much since it’s a 8″. I don’t do appraisals either. If you look at some similar saws on ebay that might point you in the right direction.

  3. Constance says:

    Hello. I have a 9″ Bench Saw by Craftsman Model #10320002. Would like to find a manual for same. Do you have any manuals or comments that might lead me in the right direction for finding one??? Puzzeled by the motor rail guide and its function and if this part need some sort of nut or cap on the end. thanks for any help you can give me. I think this saw was of the mid 1980′s vintage.

  4. Curt says:

    I have a 10 inch Craftsman table saw 113.29920 made by Emerison. I need a motor for it. I know it had a 1 hp motor does anyone know what the RPM of the motor was?

  5. Scott says:

    Constance,
    I have a manual for my craftsman bench saw M
    #10320003. One digit away from the saw manual your looking for. I can make you a copy and send. ALSO, I’m looking for part number 53416 control gear for this saw if anyone can help. Thanks

  6. Ed says:

    I have a old Craftsman table saw (not sure if the is a model or serial # 113-27610) that was handed down from a couple relatives. It needs a new motor and some other parts. Does anyone know how I can go about finding a manual/parts for it. It is a heavy and sound unit, just needs some TLC to get back in shape.

  7. Paul says:

    I have an old 10″ Sears table saw model number 113.27520. A couple of threads are broken on the arbor so the nut for the blade will not go on all the way to tighten the blade. Do you know if there might be replacement arbors and where I might be able to get one? Also a friend of my has a model #103.(I am not sure of the rest of the numbers). Would the arbors be interchangable?

    Thanks

    Paul

  8. J. Erickson says:

    I have a Craftsman Bench Saw 10 inch tilting arbor Model No. 113.29920. It is in good condition and I am wondering the value of it.

    Any ideas

  9. E. Kurtz says:

    I have a craftsman table saw model 115.19810 can anyone tell me where to get a parts list and manual and a parts source.

  10. Kevin Goins says:

    I have a craftsman table saw model # 113-29992 I have been looking for the rip fence, I have the orginal but the lock down lever is broken and there is no replacement. I have been offered a few dollrs for the saw but I would like to know the value.

  11. Rich Glander says:

    I am looking for PARTS / Craftsman 8″ table saw Model #101.02142

    PATENTED JUNE 21, 1938
    Please E- Mail or call 1-248-933-9215
    Thank you

    RICH

  12. Rich Glander says:

    The white metal rack gears for raising and lowering blade are the

    problem some of the teeth broke and I repaired with epoxy, but they

    do not hold up very long.

  13. Lynn Huske says:

    I have a table saw, model # 11329991, do you have any idea what it’s worth? It does work.

  14. Bob K says:

    I have a 10″ Craftsman model 11327521 which I need to sell. What would a fair asking price? The saw works perfectly.

  15. jim says:

    I AM LOOKING FOR V BELTS(MATCHING SET) FOR CRAFTSMAN BENCH SAW MODEL NO.113.29920.CAN ANYONE HELP?I AM ALSO LOOKING FOR AN OLD STYLE BELT SANDER 6BY48 TABLE TYPE.

  16. Doyle Henderson says:

    If you know a machinist maybe you can get him to fix the fence for you.

    I have a craftsman table saw model # 113-29992 I need a plate for my 13/16 dado blade. Can someone help me

  17. grampa_dick says:

    I have a craftsman table saw 113 29992 and I need a dado assembly plate
    Can you help me.

    My e-mail is delhotel@comcast.net

    Thanks

    Doyle Henderson

    grampa_dick

  18. Pete S says:

    Was wondering if anyone could help me find extension wings and a rip fence with rails for this saw… I just got one of these saw and it is real solid, but has now wings, miter gauge, for rip fence and guide rails for rip fence. Thanks!

  19. Pat C says:

    Bob K.
    You mentioned you have a model 113.27512 table saw for sale. Is it running or good for parts. Did you find out want it is worth?

    Site unseen I’ll offer $100. let me know.

    Thanks.

  20. Pat C says:

    Oh – darn- What I’m really looking for is a new scale in front and the safty cover for the blade.

  21. jeff nelson says:

    I got my hands on a model # 113.27521 SEARS TABLE SAW ,run good and is in good shape . Whaqts it worth ? $$ thanks Jeff

  22. mike says:

    I need a miter gauge for a craftsman mod 113.27580

Leave a Comment or Discuss in the Forums